EUROM Mon Soleil 300 Bedienungsanleitung Seite 65

ECO button
If the ECO button on the remote control is pressed, the display will show EC. The
heater will start to heat if the ambient temperature drops to below 16 °C and will
turn off if the ambient temperature increases to above 16 °C. Pressing the ECO
button again will switch off the ECO mode.
Wi-Fi and app operation
The heater can also be controlled with an app on your smartphone. To do this, the
heater must be connected to a Wi-Fi modem.
Download the Eurom Smart App
Scan the QR code below or search for 'Eurom Smart' in the App store or Google
-
Play and follow the download instructions.
The Eurom Smart App will be added.
-
For more information about the App see: www.eurom.nl/nl/manuals.
-
Safety precautions App
Safety and remote operation
Your Eurom heater can be easily operated, via the same WLAN, via a different
WLAN, or via a 3G or 4G mobile network. This makes it possible to operate your
heater remotely, without your direct supervision. Beware that even when
operating the heater remotely, all safety precautions stated in the user manual
supplied must be observed. Read and understand these safety precautions and
make sure that all safety precautions are taken also with remote operation.
Safety and setting the timer
The Eurom Smart App has a 'Smart Timer' with which you can create a
schedule yourself with days and times on which the heater is to automatically
switch itself on and off. Any timer data entered into the Eurom Smart App will be
stored in the heater. This means that, once you have entered the timer data and
the heater loses the connection with the Wi-Fi modem, the heater will still be
able to switch itself on and off on your specified times. Storing the timer data in
the heater is a safety precaution. Your set on and off times schedule will also
work without a Wi-Fi connection. So the heater will not unexpectedly continue
heating up if the Wi-Fi connection (temporarily) fails.
The Smart timer data will be stored, even if the heater is switched off or the
plug is removed from the socket. The set Smart timer data can only be checked
via the App and also only be removed via the App. Bear this in mind when
65