Dometic GROUP WAECO TC-21FL-ISO Bedienungsanleitung Seite 19

TC-21FL-ISO.book Seite 19 Freitag, 24. September 2010 2:14 14
TC-21FL-ISO
7.1
7.2
➤ Place the cooler on a firm support or fasten it in the vehicle using the
➤ Connect the cooler
➤ Press the button „ON/OFF" at the control panel (see Illustration 2 A,
✓ The cooling box starts to cool or heat the interior space.
Downloaded from www.Manualslib.com
Tips to save energy
A ventilator in the interior space of the cooling box provides for the
circulation of the cold air within the box. Thus a better cooling
capacity will be achieved. In order that the cold air cannot reach
the outside when opening the cooling box, this is equipped with a
switch which turns off the ventilator as soon as the lid is opened.
Select a well ventilated location which is protected against sunrays.
Let warm foods first cool down before you bin them.
Avoid an unnecessary low inside temperature!
Do not open the refrigerator more often than necessary!
Do not leave the lid or door open longer than necessary!
Switch on the cooling box
ISOFIX kit.
The plug is safe against wrong polarity: You can plug it only in one
direction into the (see illustration 3, page 2) socket.
– Using the cable supplied to a 220-240 V AC socket, or
– Using the cable supplied to the 12/24 V socket in the vehicle (see
illustration 3, page 2).
Page 2) to switch on the cooling box.
Operating display
red (see Illustration 2 B, Page 2)
blue (see Illustration 2 C, Page 2)
Take care that there are only objects or goods in the cooling box
which may be cooled or heated to the selected temperature.
manuals search engine
Operating mode
heating
cooling
Operation
19