Re-Syncing The Transmitter And Receiver - DigiSender XD-2KM Bedienungsanleitung

Using your DigiSender® XD-2KM
Re-syncing the Transmitter and Receiver
Should you need to re-sync the Transmitter and Receiver at any point, this can be achieved by follow-
ing the instructions below.
1.
Turn on both the Transmitter and the Receiver.
Please note that because you need to hold the Pair Button on both the Transmitter and Receiver simulta-
neously, you will need to have the Transmitter and Receiver in the same room as each other and within
reach. Alternatively, if you have someone that can help, they can hold the Transmitters Pair Button in the
lounge while you hold the Receivers Pair Button in the bedroom.
Please read the instructions carefully prior to installation
Downloaded from www.Manualslib.com
DGXDSDV111SMA-2KM/DGXDSDV112SMA-2KM - 2000m Digital AV Sender System
manuals search engine
2.
Press and hold the Pair Button on the back of the
Transmitter and Receiver, simultaneously, for 5 sec-
onds and then release.
ENGLISH (EN)
Page 13