The Kvm Switch; Scope Of Delivery - G&D DL-DVI-MUX4-NT Installation Und Bedienung

The KVM switch

The KVM switch
The KVM switch DL-DVI-MUX4-NT lets you operate up to four computers from
one workstation.
NOTE:
ants of the KVM switch. The video signals of these computers are output on sepa-
rate workstation monitors.
The workstation is equipped with a keyboard and mouse as well as a monitor. The
computers connected to the KVM switch are operated centrally at the workstation.
Switching to one of the computers connected to the KVM switch can also be carried
out via
 the buttons on the device,
 configured select keys,
 configured step keys,
 a serial device,
 the web application Config Panel
 the switching tool EasyControl,
 XML control,
 or SNMP.
Two USB 3.0 interfaces are available on the front of the device for operating any
USB device. The connected USB devices are available at the active computer.
NOTE:
channel and guarantees error-free booting of the connected computers at all times.

Scope of delivery

 1 × KVM switch DL-DVI-MUX4-NT
 1 × data cable (USB-Service-2)
 1 × power cable
 1 × rack mount set
 1 × manual »Installation and Operation Guide«
 1 × manual »Web application Config Panel«
IMPORTANT:
cable set.
3 · G&D DL-DVI-MUX4-NT
Downloaded from www.Manualslib.com
You can connect computers with multiple video outputs to the MC vari-
The KVM switch works with full keyboard and mouse emulation on each
Each computer you want to connect requires an individual KVM
manuals search engine