i-tec USB-C Slim HUB 3 Port + Gigabit Ethernet Adapter Gebrauchsanweisung Seite 4

DRIVER INSTALLATION FOR ETHERNET PORT
Windows Operating System



Mac Operating System


CONNECTION TO A NOTEBOOK / PC





VERIFYING THE DRIVER FOR ETHERNET PORT
To verify the driver of the adapter, follow the steps below to open the Device Manager on
Windows®
Following the path as below to open the device manager



To verify the driver of the adapter, follow the steps below to open the Device Manager on Mac®

Downloaded from www.Manualslib.com
Please download the current drivers on
double-clicking on the file.
Wait for the program to install the drivers.
Click <Finish> to complete the installation.
Please download the current drivers on
double-clicking on the file.
Wait for the program to install the drivers.
Connect the USB cable to a USB port on your notebook / PC.
Then start the automatic installation of USB ports in various systems – it is recommended to be
connected to the Internet for online download of newer versions of drivers.
Restart your notebook / PC.
Connect the adapter to an available network when the installation procedure is completed.
Connect one end of the Ethernet cable into the RJ-45 port of the device and the other end into
an active element of your network - HUB, switch, router (preferably with Gigabit speeds for
maximum speed adapter). If necessary, restart your notebook / PC.
Windows® 10: Start / Device Manager
Windows® 7 / Windows® 8 / Windows® 8.1: Control Panel / System and Security / System /
Device Manager
In the Network adapters group, an item named „ASIX AX88179 USB 3.0 to Gigabit Ethernet
Adapter".
Please connect the USB to LAN device to MacBook / PC.
manuals search engine
www.i-tec-europe.eu and start the installation by
www.i-tec-europe.eu and start the installation by