Technical Data; Installation Information; Software Central Controller; Mzb-Zr Update Via "Multizone Update" Software - Helios KWL-MZB-ZR Montage- Und Betriebsvorschrift

Installation and Operating Instructions
EN
CHAPTER 2
INSTALLATION/
ELECTRICAL
CONNECTION
CHAPTER 3
SOFTWARE
CENTRAL CONTROLLER
Central Controller KWL-MZB-ZR

1 .10 Technical data

Supply voltage
Power consumption
Protection category
USB type
Network connection
Network cable length max .
Number of KWL-MZB
Installation room requirements
Max . operating temperature
Weight

2 .0 Installation information

Installation
Place the central controller KWL-MZB-ZR on the standard top-hat rail from above at a slight tilt and push backwards
until the unit locks into place. Ensure the future accessibility of the connections (e.g. USB connection) during installation.
3 .0

Software central controller

3 .1

MZB-ZR update via "Multizone Update" software

Connect the MZB-ZR to your PC via a USB data cable.
Start the application "Multizone Update"
Click on the "Establish connection via USB" button.
Once the KWL-MZB-ZR has been found, the system information will be displayed (version, date, last update).
Click on the "Select file" button.
This will open the explorer window and all available firmware files will be displayed.
Select Helios MultiZoneBox by clicking on it and confirm by clicking "Open".
If a newer version is displayed under update information (recognisable by the higher number), start the update process
by clicking on the "Start" button.
The update process may take a few minutes and the status will be displayed by green bars.
Completion of the update will be displayed in the software.
Now close the application "Multizone Update".
12-24 V DC
3 W
IP20
B
10/100 Mbit RJ45
300 m (per connection ZR)
max. 255
0-55 °C < 95 % RH; non-condensing
55 °C
170 g
2