19" TFT LCD TV CTV 4868 LCD/DVD
MENU SCREENS DVD
11
Menu screens DVD
Press „DVD SETUP" button to get the setup menu. Use the cursor buttons "
After finishing setting, press „DVD SETUP" again for normal TV display.
The following menu items can be changed:
GENERAL: selects the General Page menu.
AUDIO: selects the Audio menu.
DOLBY: selects the Dolby Digital Setup menu.
VIDEO: selects the Video Setup Page menu.
PREFERENCE: selects the Preference Page menu.
General Setup Page
The following menu items can be changed:
TV DISPLAY
Here you can adapt the output of the DVD-Player to the TV-aspect.
4:3 PS
You will only see the middle section of the film. The borders will be cut off.
4:3 LB
You will see the complete width of the film. The film is thus reduced in size, whereby black bars
appears below and above the film.
16:9
Select this option if you use a wide screen TV for reply.
Note:
The setting „4:3 PS" is not supported by all DVDs.
ANGLE MARK
Shows a hint for the possibility to change the viewing angle (if available).
OSD LANGUAGE
Here you can select the language of the on-screen displays.
SCREEN SAVER
The player is able to display a still image for any time on the screen. This can cause damage to the screen. It
is therefore recommended to activate the screen saver.
52
" to select the preferred item.