Replacing The Filters; Filter Replacement Indicator - Philips 1000i Serie Benutzerhandbuch

8
Put the plug of the air purifier in the
power socket.
9
Touch and hold the
3 seconds to reset the pre-filter
cleaning time (Fig.x).
10
Wash your hands thoroughly after
installing filters.
6 Replacing the
for
Filter replacement
indicator
This air purifier is equipped with a
filter replacement indicator to make
sure that the air purification filter is in
optimal condition when the air purifier
is operating. When the filters need to be
replaced, the filter code displays on the
screen.
If the filters are not replaced in time,
the air purifier will stop operating and
automatically lock.

Replacing the filters

• The air purification filters are not
• Always turn off the air purifier and
• Do not clean the filters with a vacuum
• If the pre-filter is damaged, worn or
filters
Note
washable nor vacuum cleanable.
unplug from the electrical outlet
before replacing the filters.
cleaner.
broken, do not use. Visit
www.philips.com/support or contact
the Consumer Care Center in your
country.
EN 11