When The Work Is Done - Bosch BGL45 Serie Gebrauchsanleitung

4*
Figure
a) Connect the floor tool and the telescopic tube together.
b) Push the telescopic tube straight into the
connecting piece of the floor tool until it
engages.
To release the connection, squeeze the locking collar
and pull the telescopic tube out.
5*
Figure
To adjust the length of the telescopic tube, adjust the
adjusting sleeve/sliding switch in the direction of the
arrow and adjust the tube to the required length.
6*
Figure
Attach the accessories holder to the multi-purpose
nozzle and clip it onto the suction pipe/telescopic tube.
7
Figure
Take the mains plug, pull the mains cable to the required
length and insert the plug into a socket.
8
Figure
Press the ON/OFF button in the direction of the arrow to
switch your vacuum cleaner on.
Vacuuming
9
Figure
The required suction power can be selected infinitely
variably by adjusting the slide control.
Lowest
suction range:
For vacuuming delicate fabrics,
e.g. curtains.
Low
suction range:
For daily vacuuming of lightly soiled floors.
Medium
suction range:
For vacuuming durable floor coverings, hard floors and
for heavily soiled surfaces.
High
suction range:
For vacuuming stubborn dirt and very heavily soiled
surfaces.
10
Figure
Adjusting the floor tool:
a) For vacuuming rugs
and carpets
b For vacuuming
hard floors
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
11*
Figure Vacuuming with accessories
Attach the nozzles to the tube or handle as required:
a) Crevice nozzle for vacuuming crevices and corners, etc.
b) Upholstery nozzle for vacuuming upholstered furniture,
curtains, etc.
c) Hard-floor nozzle*
- with clip-in edge cleaning bristles:
For gentle but effective cleaning of hard floor co-
verings (tiles, parquet, etc.)
- without edge cleaning bristles:
For cleaning dirt in gaps and cracks
The edge cleaning bristles can be removed by
pushing the two catches in the direction of the
arrows
12*
Figure
Pet hair tool
Floor tool for easy and thorough vacuuming of pet hair.
Push the telescopic tube into the connecting piece of the
pet hair tool until it engages.
Press on the locking collar and pull out the telescopic
tube to disconnect.
To clean, simply vacuum the tool using the suction
pipe/telescopic tube.
13*
Figure
Hard-floor brush
For cleaning hard floor coverings
(tiles, parquet flooring, etc.)
Connect the floor tool and the telescopic tube together.
14
Figure
Once you have switched off the vacuum cleaner, you can
use the parking aid on the back of the vacuum cleaner if
you wish to stop vacuuming for a short time.
To do this, slide the catch on the floor tool into the
groove on the back of the vacuum cleaner.

When the work is done

15
Figure
Unplug the vacuum cleaner.
Briefly pull the power cord and release. The cord rewinds
automatically.
* Depending on model
=>
=>
41