Start Time Delay - Silvercrest SMW 800 D3 Bedienungsanleitung

If you do not think the food needs turning, do nothing and simply allow the programme to continue. After
a short time, "turn" disappears and the display (1) continues to count down the remaining time.
The display shows a flashing "End" to indicate the end of the defrost process and beeps 5 times. If the
microwave door is not opened, the 5 beeps are repeated every 2 minutes.
"End" flashes on the display (1) until the door is open.

9.7. Start time delay

This function allows you to programme the microwave so that a programme you select starts at the time
you want.
To delay the start time, it is crucial that the clock is set correctly.
The start time delay does not work for the "Defrost" programme, the "A-05" (heating)
programme and the "Microwave mode / Quick Start" function.

Set the microwave function you want (microwave mode, grill mode, combination mode or automatic
programme).

Microwave mode: Press the Microwave button
the cooking time you want using the rotary knob (9)

Grill mode: Press the Grill button
knob (9).

Combination mode: Press the Combination button
"C-2" you want using the rotary knob (9).

Automatic programmes: Use the rotary knob (9) to select an automatic programme
(apart from A-05) and confirm this by pressing the Start/Quick Start button
rotary knob to select the weight of the food.

Press the Timer/Clock button

Select the hour for the start time you want by twisting the rotary knob (9) and confirm by pressing the
Start/Quick Start button

Select the minute for the start time you want by twisting the rotary knob (9) and confirm by pressing
the Start/Quick Start button
The programmed start time now flashes on the display (1). At the same time, the relevant symbols to
match the microwave function selected (microwave mode, grill mode, combination mode or automatic
programmes) also flash.
At the set start time, the unit beeps twice and the selected programme is started automatically.
It is possible to cancel the programmed start time and the whole process programmed at any time. To do
this, press the Stop button
(6), adjust to the grilling time you want using the rotary
(10). The hour digits flash on the display (1).
(9). The minutes digits flash on the display (1).
(9).
(8). The current time is now shown on the display (1).
SilverCrest SMW 800 D3
(12), select the power level and adjust
(7). Select the mode "C-1" or
(9). Twist the
English - 59