Taking Measurements - Beurer ME 90 Gebrauchsanweisung

5. Taking measurements

. There are three different methods of taking the measurement. Start with measurement
1
method A, "right index finger–chest". If this method does not deliver measurements, or
delivers only unstable measurements ("EE" is frequently displayed), switch to method B
"left index finger–chest" and, if necessary, to method C "left hand–right hand".
The most suitable method/procedure depends on the heart configuration (shape of the
heart) of each individual user. If it is not possible to take stable measurements using a given
measurement method, this could have a harmless cause such as the shape of the heart.
However, the cause may also be an illness or disease.
Note: measurement method C offers maximum comfort, but offers a much lower
measurement stability than methods A or B.
. Press the on/off button for about three seconds to turn the device on. The device shows
2
the full display.
Warning
If segments are missing, stop using the device and immediately contact customer services.
To test whether the full display is completely displayed, hold the On/Off button when
switching on the device.
32