Cameo EVOS W3 Bedienungsanleitung Seite 15

001
Settings
43CH
Info
Service
DMX Settings DMX control via XLR cable (XLR Only) or W-DMX (Wireless Only). If "XLR
First" is selected, W-DMX serves as a backup; if "Wireless First" is selected,
control via XLR cable serves as a backup.
Quick-Light
Control
030°C
DMX
Mode: Art-Net (sACN)
Reset = Terminates the connection to all W-DMX devices and puts them in
W-DMX
"ready to pair" mode.
Universe:
Art-Net
sACN
IP: 192.168.000.150
Art-Net+DMX
OPERATION VIA KLING-NET AND DMX
DMX Address:
When selecting this operating mode, there are two channel modes to select from for the control functions. Only the motion functions are
sACN+DMX
available in 11-channel mode and the pixels are only controlled with the second input signal. Illumination functions are also available in
Kling-Net+DMX
18-channel mode.
Slave
Starting from the main display, press the push-button rotary encoder to navigate to the main menu. Rotate the encoder to select the control
Scenes
menu Control and then press the encoder. Rotate the encoder to select the Kling-Net+DMX menu item and confirm by pressing the
encoder. The table below provides information on the submenu items in the Kling-Net+DMX menu and the corresponding setting options.
Main Menu Control
Control DMX
W-DMX
Settings
Art-Net
sACN
Info
Art-Net+DMX
sACN+DMX
Service
Kling-Net+DMX
Slave
Quick-Light
Scenes
Control Control
Rotate the encoder to select, press the encoder to confirm, rotate to change value or status, press to confirm. Return with
DMX DMX

W-DMX W-DMX
Address Sets the DMX start address Main
Art-Net
Art-Net
sACN sACN
Pixel Control RGB or RGBW pixel control
Art-Net+DMX Art-Net+DMX
sACN+DMX sACN+DMX
Kling-Net+DMX
Kling-Net+DMX
Slave Slave
Scenes Scenes
Sets the channel mode
Control
DMX Settings DMX control via XLR cable (XLR Only) or W-DMX (Wireless Only). If "XLR
DMX
First" is selected, W-DMX serves as a backup; if "Wireless First" is selected,
W-DMX
control via XLR cable serves as a backup.
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Reset = Terminates the connection to all W-DMX devices and puts them in
Slave
"ready to pair" mode.
Scenes
Control
DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
!
Scenes
030°C
DMX
43CH Mode:
W-DMX
0 Universe:
Art-Net
sACN
IP:
Art-Net+DMX
001 Main Address:
sACN+DMX
Kling-Net+DMX
Pixel Address:
Slave
!
Scenes
DMX DMX
W-DMX W-DMX
Art-Net Art-Net
sACN
sACN
Art-Net+DMX Art-Net+DMX
sACN+DMX sACN+DMX
Kling-Net+DMX Kling-Net+DMX
Slave Slave
Scenes
Scenes
Kling-Net + DMX
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
Mode
Slave
(Scene x)

Receive Mode
Control
Art-Net (sACN)+DMX
Connect
192.168.000.150
001
001
Control Control
Control

Main Address

Pixel Mode
Channel Mode
Control

Receive Mode
Connect
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
! 
Scenes
XLR Only
XLR First
Wireless First 030°C
Wireless Only
DMX
Mode:

W-DMX
0 Main Address:
Reset
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
!
Scenes
DMX DMX
W-DMX W-DMX
Art-Net Art-Net
sACN
sACN
Art-Net+DMX Art-Net+DMX
sACN+DMX sACN+DMX
Kling-Net+DMX Kling-Net+DMX
Slave Slave
Scenes
Scenes

.
DMX
W-DMX
Art-Net
001–xxx
sACN
Art-Net+DMX
sACN+DMX

Kling-Net+DMX
RGB
Slave
RGBW
Scenes

11CH
18CH
DMX
W-DMX

Art-Net
XLR Only
sACN
XLR First
Art-Net+DMX
Wireless First
sACN+DMX
Wireless Only
Kling-Net+DMX

Slave
Scenes
Reset
15
Co
Klin
Co Co
Co
Co