Philips PerfectCare Azur GC4900 Serie Bedienungsanleitung Seite 6

ENGLISH
8
Steam settings
You can set different steam settings with the steam slider:
- No steam: to stop steam output when the iron is not in use.
During ironing, always choose ECO or MAX setting.
- ECO: (specific types only) to save energy, reduce the steam
output, and still have sufficient steam to iron your garments.
- MAX: to set the maximum steam output, perfect
combination with OptimalTemp setting.
For the best results and shortest ironing time, we strongly
recommend that you iron all ironable fabrics at the setting for
maximum steam output.
1 Make sure there is enough water in the water tank.
2 Push the steam slider to the desired steam setting.
Using the appliance
Ironing
With the OptimalTemp technology, you can iron every single
garment effectively and safely, even delicate fabrics like silk
without having to worry about temperature settings.
1 You can start ironing when the SmartLight stops flashing
and lights up blue steadily. (See chapter 'Preparing
for use', section 'Heating up').
Note: When resting the iron on heel, it makes a sputtering
sound as water gets
evaporated by the hot soleplate. This is normal.
Features
Spray function
You can use the spray function to moisten the garment to
be ironed. This helps to remove stubborn creases.
1 Make sure there is enough water in the water tank.
2 Press the spray button several times to moisten the
garment to be ironed.
Steam boost function
A steam boost from the soleplate helps removing stubborn
creases. The steam boost enhances the distribution of steam
into every part of the garment.