Malfunctions; Transport And Storage; Technical Specifications - Tunturi BIKE 1.0 Betriebsanleitung

MALFUNCTIONS

Despite continuous quality control, defects and
malfunctions caused by individual components may
occur in the equipment. In most cases it's unnecessary to
take the whole device in for repair, as it's usually sufficient
to replace the defective part. If the equipment does not
function properly during use, contact your Tunturi dealer
immediately. Always give the model and serial number
of your equipment. Please state also the nature of the
problem, conditions of use and purchase date.
If you require spare parts, always give the model, serial
number of your equipment and the spare part number for
the part you need. The spare part list is at the back of this
manual. Use only spare parts mentioned in the spare part
list.
TRANSPORT AND
STORAGE
Please follow these instructions when carrying and moving
the cycle about, because lifting it incorrectly may strain
your back or risk other accidents:
Stand behind the equipment. Grip the seat with one
hand and the handlebar with the other, and set your
foot on the rear support. Tilt the equipment so that it rests
on its transport wheels. Wheel the equipment to move
it, on these transport wheels. Lower the equipment while
holding on to the handlebar and remain behind the
equipment all the time. NOTE! Transport the equipment
with caution over uneven surfaces, for example over a
step. The equipment should never be transported upstairs
using the wheels over the steps, instead it must be carried.
We recommend that you use a protective base when
transporting the equipment.
To prevent the equipment malfunctioning, store in a dry
place with as little temperature variation as possible and
protected from dust.
TECHNICAL
SPECIFICATIONS
Length:
Width:
Height:
Weight:
This product meets the requirements of the EU's EMC
Directives on electromagnetic compatibility (89/336/EEC)
and electrical equipment designed for use within certain
voltage limits (73/23/EEC). This product therefore carries
the CE label.
This product meets EN precision and safety standards
(Class HB, EN-957, parts 1 and 5).
Due to our continuous policy of product development,
Tunturi reserves the right to change specifications without
notice.
NOTE! The instructions must be followed carefully in
the assembly, use and maintenance of your equipment.
The warranty does not cover damage due to negligence
of the assembly, adjustment and maintenance instructions
described herein. Changes or modifications not expressly
approved by Tunturi-Fitness will void the user's authority to
operate the equipment!
We wish you many enjoyable trainings with your new
Tunturi training partner!
5
98 cm
56 cm
138 cm
31 kg
Bike 1.0 - OWNER'S MANUAL ENGLISH