Environmental Aspects - Atag HG311M Bedienungsanleitung

faults
what should I do if...
If the appliance does not work properly, it does not always mean that it is defective. Try
to deal with the problem yourself first. Phone the service department if the advice given
below does not help.
fault cause
Burner does not burn or Burner is dirty or damp.
ignite properly.
Burner cap not fitted on the
burner correctly.
The ventilation slots at the
rear of the appliance are
blocked.
Appliance is not suitable for
the type of gas used.
The spark ignition sparks, but Sparking plug dirty.
does not ignite.
Burner is dirty or damp.
Burner cap not fitted on the
burner correctly.
The indicator light for the The warming zone switches
warming zone blinks. off automatically after two
hours. The indicator light then
starts to blink.
There is an object on top of
the touch control.
GB 10
solution
Clean and/or dry the burner.
Fit the burner cap on the
burner correctly.
Unblock the ventilation slots.
Check the data plate and
have the appliance converted
by a qualified fitter if
necessary.
Clean the sparking plug.
Clean and/or dry the burner.
Fit the burner cap on the
burner correctly.
Press the touch control for
one second until the red
indicator light goes out. The
warming zone switches off.
Remove the object from the
touch control. Press the
touch control for one second
until the red indicator light
goes out.

environmental aspects

disposal of packaging and appliance
The appliance's packaging is recyclable. The following can be
used:
• cardboard;
• polyethylene film (PE);
• CFC-free polystyrene (PS rigid foam).
Dispose of these materials in a responsible way and in
accordance with government regulations.
The authorities can provide you with information about how
to dispose of discarded domestic appliances in a responsible
way.
GB 11