Product Specification; Operating Controls; For Your Safety; Intended Use - Bosch AXT Rapid 180 Bedienungsanleitung

Downloaded from www.Manualslib.com
EURO • BA F016 L69 923 • AXT RAPID 180/200 • GB • OSW 03.06
F 016 L69 923 - GB Seite 2 Mittwoch, 18. Juni 2003 2:57 14

Product Specification

Shredder
Part number (typ)
Rated power [W]
No-load speed [rpm]
Capacity max. * [kg/h]
Branch diameter max. * [mm]
Weight. approx. [kg]
Protection class
Serial Number See serial No 10 (rating plate) on machine.
*) depending on the hardness of the wood

Operating Controls

1 Feed intake
2 On/Off switch
3 Safety button
4 Mains plug**
5 Ventilation slots
6 Undercarriage
7 Collection sack *
8 Discharge chute
9 Hooks for collecting bag
10 Serial Number
11 Cover
12 Allen Key
13 Prodder
*Optional accessory
**Country specific
* Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

The product is intended for cutting of fibrous and
woody garden waste for composting.
When operating the machine with a generator, a unit
with a power rating of 4 kVA is necessary.
13 • F 016 L69 923 • TMS • 13.06.03
manuals search engine
AXT Rapid 180 AXT Rapid 200
0 600 853 0.. 0 600 853 1..
1800 2000
3650 3650
80 90
33 38
13 13.2
/ II / II

For Your Safety

Warning! Switch off, remove plug from mains
before adjusting, cleaning or if cable is cut,
damaged or entangled.
The blades continue to rotate for a few sec-
onds after the machine is switched off.
Caution – do not touch rotating blades.
Electrical Safety
Your machine is double insulated for safety and re-
quires no earth connection. The operating voltage is
230 V AC, 50 Hz. Only use approved extension ca-
bles. Contact your service agent for details.
Extension cords/leads should only be used if they
comply with H05VV-F or H05RN-F types.
It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.
The couplings of connection leads must be pro-
tected against splashes and the coupling sockets on
the leads must be made of rubber or coated with rub-
ber.
Fixing means for the connection leads must be used.
The connection lead must be inspected for signs of
damage at regular intervals and may only be used if
in perfect condition.
If the supply cord is damaged, it must be replaced by
a Bosch Service Center.
Products sold in GB only: Your mower is fitted with
an approved 13 A (BS 1363/A) electric plug and is
protected by a 13 A fuse (ASTA Approved to
BS 1362).
If the fitted plug is not suitable for your socket out-
lets, it should be cut off and an appropriate plug fitted
in its place.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be inserted
into a 13 A socket elsewhere.
English - 2