Accessory Parts And Parts To Be Procured Locally - Toshiba RAV-SM562CT-E Installations-Handbuch

Accessory parts and Parts to be procured locally

r Accessory parts
Part name
Owner's Man
ual
Installation Manual
Installation pattern
Thermal insulation
pipe
Washer
Hose band
<Separate sold parts>
Part name
Standard wired
remote controller
r Parts to be procured locally
Connecting pipe (Liquid side)
(6.4mm (diam.), Nominal (diam.) 1/4" thick 0.8mm)
RAV-SM562CT-E
(9.5mm (diam.), Nominal (diam.) 3/8" thick 0.8mm)
RAV-SM802CT-E, RAV-SM1102CT-E, RAV-SM1402CT-E
Connecting pipe (Gas side)
(12.7mm (diam.), Nominal (diam.) 1/2" thick 0.8mm)
RAV-SM562CT-E
(15.9mm (diam.), Nominal (diam.) 5/8" thick 1.0mm)
RAV-SM802CT-E, RAV-SM1102CT-E, RAV-SM1402CT-E
Power supply cord
2.5mm² (H07RN-F or 60245IEC66) (20m or less)
3.5mm² (AWG-12) (70m or less)
Downloaded from www.Manualslib.com
Q'ty Shape Usage
1 — —
1 This manual —
1 Drawing-out port of
—
hanging bolt pipe
For thermal insulation of
2
pipe connecting section
4 M10 × Ø25 For holding down unit
For connecting drain
2
pipe
Q'ty Shape Usage
CODE No.
1
SET DATA SETTING TEST
UNIT No.
R.C. No. Model
H
TEMP. ON / OFF
RBC-AMT31E
TIMER SET FAN MODE
TIME SWING/FIX VENT
FILTER
RESET TEST SET CL UNIT
manuals search engine
Part name Q'ty Shape
Drain hose 1
Bushing 1
Thermal insulator 1
Thermal insulator
1
of top plate
Banding band 2
Connecting cable (indoor and outdoor cable)
H07RN-F or 60245IEC66 (1.5mm² or more)
Thermal insulation for refrigerant pipe
(10mm or more, thermal insulating foam polyethylene)
Thermal insulation for drain pipe
(10mm or more, foam polyethylene)
Drain pipe (Outer 26mm (diam.)) (VP20)
Tapes
1
Usage
For connecting drain pipe
For protection of edge at
power taking-in port
For thermal insulation of drain
hose (10t × 200 × 200)
For upper pipe hole of indoor
unit (6t × 130 × 160)
For prevention of open of
drain hose thermal insulator