Introduction; Package Contents - Guntermann & Drunck MultiPower-12-NT Installationsanleitung

Introduction

The central power supply
The maximum power consumption permitted per device is 800 mA.
12VDC/800mA
Use power loop cables to connect the Mini-DIN 4 sockets of up to twelve devices to
one of the Mini-DIN 4 sockets of the central power supply.
Two internal power packs ensure the redundant power supply of the
Power-12-NT
The LEDs on the front and the back panel show the device's operating status and
the load of all active devices.
The web application
central power supply.

Package contents

 1 × central power supply
 12 × power loop cables
 2 × power cable
 1 × USB service cable
 1 × manual
Downloaded from www.Manualslib.com
MultiPower-12-NT
Power Status
M P -12-
ULTI OWER NT
Power Out 1 Power Out 2 Power Out 3 Power Out 4 Power Out 5
Status Status Status Status Status
12VDC/800mA 12VDC/800mA 12VDC/800mA 12VDC/800mA 12VDC/800mA
.
Config Panel
manuals search engine
supplies up to twelve devices with 12 Volt.
Power Out 6 Power Out 7 Power Out 8 Power Out 9 Power Out 10 Power Out 11
Status Status Status Status Status
12VDC/800mA 12VDC/800mA 12VDC/800mA 12VDC/800mA 12VDC/800mA
provides a graphical user interface to monitor the
MultiPower-12-NT
Introduction
Main Power
Power Out 12 Power
Status Status Load Service Red.
Main
12VDC/800mA
G&D MultiPower-12-NT · 2
Red. Power
Multi-