Maintenance; Cleaning; Maintenance Plan - Zipper Maschinen ZI-COM24E Betriebsanleitung

16

MAINTENANCE

The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance deficiencies
can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
16.1

Cleaning

Keep the safety devices free of dirt and dust as far as possible. Wipe the machine with a clean cloth or
blow it with compressed air at low pressure.
Do not use cleaning agents or solvents; these could attack the plastic parts of the
machine!
Put on all coatless flats a thin coat of oil.
16.2

Maintenance plan

Loose or lost screws, nuts, bolts
Damage of any part of the machine
Oil level
Machine cleaning
Air filter cleaning
Oil changing
ZIPPER MASCHINEN GmbH
ZI-COM24E / ZI-COM50E
 Switch off and disconnect from the power supply!
 Let cool down the air compressor!
 Depressurize the air tank
Controls for the maintenance of the machine
www.Zipper-Maschinen.at
A T T E N T I O N
Bevor maintenance:
N O T I C E
N O T I C E
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly after operation
Every 20-30 working hours
Every 250 working hours
MAINTENANCE
22