Sauber UVC-122311.3 Bedienungsanleitung Seite 16

OPERATION
1. Assemble the battery pack into the main body. (Fig. 2)
2. Assemble the dust cup. Observe the LOCK (A) and UNLOCK (B) icon on the dust cup, align the MARKER LINE
(C) with the UNLOCK (B) icon.
3. After alignment, push the dust cup towards the vacuum body, ensure they are well engaged with each other.
4. Keep dust cup release button (D) pressed, turn dust cup in anti-clock wise direction, once the click sound is
heard, the dust cup is properly locked.
5. Insert the extension tube into the suction hole opening; make sure it fits firmly.
6. Attach the floor brush to the other side of the extension tube.
7. If you want to use the attachment long crevice nozzle or 2 in 1 crevice nozzle, attach it to the suction hole
opening directly or to the other side of the extension tube instead of the floor brush according to your own
desire. Once the click sound is heard, the nozzle is properly locked.
8. Press the speed button to turn on the appliance. The battery polit light will illuminate green.
Press the speed button once: low speed;
Press the speed button twice: high speed;
Press the speed button thrice: off.
NOTE: During use, please pay attention to the dust capacity and do not exceed the "MAX" level indicated on
the dust cup. This appliance is for dry suction only.
Caution: The suction hole opening must be open and free of any obstructions at all times. Otherwise, the motor
will overheat and could become damaged.
- 15 -