Expolite Tour-LED MC 40 Bedienungsanleitung Seite 28

Miscellaneous Settings
MENU
The default password is: UP - DOWN - UP - DOWN - ENTER
UPLOAD: sends the user programs to connected slave fixtures.
RESET: sets all editable settings back to factory default.
COLOR: in this submenu a colour calibration is selected or deactivated. When RGBW is selected,
the maximum brightness values at DMX = 255 are limited to the values set in CALIB.C\RGBW.
When UC is selected the Uniform-Colour factory calibration is used, which adjusts devices of
different generations. If the value is set OFF, the calibration is deactivated and the device reaches
the maximum brightness.
DIMMER: controls different dimming speeds to simulate a halogen bulb (OFF/DIM1/DIM2/DIM3/
DIM4).
DMX ERROR: sets how the fixture responses if DMX-signal gets lost. Set SAVE to hold the last
received value or BLACK for blackout.
PWM: gives the user the possibility to adjust the PWM frequency of the leds (600Hz/1200Hz/2000Hz/
2400Hz/6000Hz/25000Hz).
FULL POWER CCT: sets the colour temperature at maximum output. 3200K/4200K/5600K/ and
NORMAL can be set.
Downloaded from www.Manualslib.com
PERSON SETTING HSIC
****
manuals search engine
UPLOAD HSIC
****
HSIC RESET
****
HSIC COLOR OFF
RGBW
UC
DIMMER HSIC OFF
DIM1
DIM2
DIM3
DIM4
DMX ERROR HSIC SAVE
BLACK
HSIC PWM 600HZ
1200HZ
2000HZ
2400HZ
6000HZ
25000HZ
3200K
FULL POWER CCT HSIC
4200K
5600K
NORMAL
E-28
SEND
RESET