Troubleshooting - Silvercrest SSP 2600 A1 Bedienungsanleitung

Downloaded from www.Manualslib.com

Troubleshooting

The power bank does not charge
♦ Connection may be faulty. Check the connection.
♦ Some computers deactivate the power supply to
the USB ports when they are turned off. Check that
the computer is turned on.
A connected device will not charge
♦ The integrated battery is empty. Charge the battery.
♦ No connection to the device. Check the connection.
♦ Press the On/Off button
charging process.
♦ The charging current of the connected device is too
low (< 60 mA) or too high (> 1 A).
The selfie stick cannot be turned on
♦ Make sure that the battery of the power bank is
charged; otherwise the selfie stick will not work. If
necessary, charge the power bank battery before
using the selfie stick. Refer also to section "Charg-
ing the power bank".
The Bluetooth
♦ The Bluetooth
activated. To check this, press the photo button
If the Bluetooth
LED
®
tooth
and hold the On/Off button
activate the Bluetooth
stick.
♦ The Bluetooth
or compact camera is not activated. Activate the
Bluetooth ®
to the operating instructions of your smartphone or
compact camera.
♦ The selfie stick and the smartphone or compact
camera are not paired. Make the connection as
described in the section "Connecting the selfie
stick and smartphone/compact camera via Blue-
". For further information, refer to the oper-
tooth ®
ating instructions of your smartphone or compact
camera.
■ 12 │ GB
manuals search engine
briefly to start the
® connection cannot be established
® function on the selfie stick is not
function is activated, the Blue-
®
lights up. If this is not the case, press
for 2 seconds to
function on the selfie
®
function on the smartphone
®
function. For further information, refer
SSP 2600 A1
.