After Each Use; Important Safety Precautions; Maintenance Procedures; General Maintenance - Bradley BS815XLT Bedienungsanleitung

After Each Use

• Unplug smoker when it is
not in use. See "Maintenance
Procedures" section.
• Place extinguished Bradley
Flavor Bisquettes® at a safe
distance from all structures and
combustible materials.
Refer to the External Components List & Internal Components List Diagrams
Important Safety
Precautions
• The Bradley Smoker must be
maintained and cleaned after
each use.
• Unplug the Long Power Cord
prior to commencement of any
maintenance or cleaning.
• Do not immerse smoker in
water.
• Do not spray inside of smoker
with any kind of appliance
cleaner.
• Do not cover or seal the Racks
or Drip Tray with aluminum foil.
This can cause severe damage to
your smoker.
• Do not leave unattended when
in use.
• Do not spray or clean the
smoker with excessive amounts of
water. Instead use a damp cloth.

Maintenance Procedures

• Use caution when handling and
cleaning your smoker as some
metal edges may be sharp.
• Clean out the Drip Bowl.
Dispose of all burnt Bisquettes
carefully as they may still be hot.
• Wash the Drip Tray, Racks,
Save these Instructions

General Maintenance

• Store the smoker in a dry
covered place out of reach of
children.
• Clean out any grease. Grease
build up may cause fire.
• Do not steam clean this
appliance.
Bottom Rectangular Tray and
Drip Bowl with hot water and
dish detergent or put them in the
dishwasher.
• Remove food particles and
grease residue from the smoker. If
the inside needs cleaning, wipe it
with a damp cloth.
• Note: The tower should have
smoke or black residue on the
inside. The more residues, the better
the product will taste.
• The Smoke Generator should
be kept clean and free of wood
chips and grease at all times. If
loose wood chips have collected
in the Smoke Generator, simply
blow or vacuum these particles
away.
• Unplug the Long Power Cord
before removing the Smoke
Generator from the Smoke
Tower. Refer to "To remove
Smoke Generator" in "Assembly
instructions".
• The Bisquettes Burner should
be lightly scraped using a wire
brush or scraper to remove any
residue that has been left by the
burning process.
4