Introduction; Intended Use; Depicted Components; Package Contents - Parkside PABH 20-Li B2 Originalbetriebsanleitung

CORDLESS HAMMER DRILL
PABH 20-LI B2

Introduction

Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important
information about safety, usage and disposal.
Before using the product, please familiarise your-
self with all operating and safety instructions. Use
the product only as described and for the range of
applications specified. Please also pass these oper-
ating instructions on to any future owner.

Intended use

The cordless hammer drill PABH 20-Li B2
(hereinafter appliance) is suitable for:
▯ Hammer-drilling into brickwork, concrete and
stone
▯ Drilling into stone, wood and metal
▯ Screwing into wood and metal
Any other usage of or modification to the appliance
is deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
The appliance is not intended for commercial use.

Depicted components

SDS-plus tool holder
Dust protection cap
Locking collar
"Drill/hammer drill" switch
Rotation direction switch
On/Off switch
Battery charge level button
Battery display LED
Battery pack*
Release button for the battery pack
LED work light
High-speed charger*
Red charge control LED
Green charge control LED
│ GB │ MT
■ 44
Drill with hexagonal shank
Drill with SDS-plus fitting
Screwdriver bits
Keyless chuck
Universal bit holder
Grease

Package contents

1 cordless hammer drill PABH 20-Li B2
3 x 150 mm SDS-plus drills Ø 6/8/10 mm
3 x drill bits Ø 5/6/8 mm (HSS) with hexagonal
shanks
6 x 50 mm bits (S2):
5.5/PH1/PZ1/PZ2/PZ2/T20/T25
2 x Bit PH2 (50 mm)
1 x bit extension (hexagonal shank)
1 x 10 mm keyless chuck for round shank drill bits
(SDS-plus fitting)
1 carrying case
50 g grease
1 set of operating instructions

Technical data

Cordless hammer drill PABH 20-Li B2
Nominal voltage
Idle speed
Stroke rate
Stroke energy
Max. drill diameter
Battery pack PAP 20 A1*
Type
Rated voltage
Capacity
Cells
High-speed charger PLG 20 A1*
INPUT
Rated voltage
Rated power consumption 65 W
Fuse (internal)
20 V (DC)
n 0–900 rpm
0
0–5000 spm
≥ 1 joule
8 mm for metal
10 mm for concrete
16 mm for wood
LITHIUM ION
20 V (DC)
2 Ah
5
230–240 V ∼, 50 Hz
(AC)
T3.15A
3.15 A
PABH 20-Li B2