User Instructions; Preliminary Test - Sensica Sensilight Mini Handbuch

User Instructions

The device is suitable for use
on: legs, arms, underarms
bikini line, back, shoulders,
chest, stomach, and permitted
facial areas (above upper lip,
cheek, jaw, chin and neck).
What to expect
During your treatment, it
is normal to experience:
• A flash of light with each
press on the trigger
button – the emitted light
will not harm your eyes.
• A pop noise with
each flash of light.
• A mild, stinging sensation.

Preliminary Test

The preliminary test is
intended to determine your
skin's reaction to treatment
with the device and help you
set the optimal energy level
for each treatment area.
Perform a preliminary test
on a hidden patch of skin
for the area you intend
to treat 48 hours prior to
the first full treatment.
Due to varying levels of
sensitivity, body areas may
require different energy levels;
this will be determined by
10
separate preliminary tests.
Note: Do not treat full areas
with energy levels that you
have not tested before!
Do not treat the tested
area for at least 48 hours
after the preliminary test
has been carried out.
1. Prepare your skin as
described below in "Step
1: Prepare your skin".
Instructions for operating
the device can be
found below in "Step 2:
Device operation".
2. Select the lowest energy
level and deliver a flash.
3. You can increase the
energy level as long as
it feels comfortable. You
may continue to do this up
to the maximum energy
level unless you begin to
experience discomfort.
4. If you do not feel
comfortable or see adverse
effects such as severe
redness or blistering stop
the test immediately.
5. Wait 48 hours and
examine the tested area:
6. If the skin in the test area