Dvb-T; Automatic Start; Setting; Main Menu - Xoro HTL 400 T Bedienungsanleitung

Automatic Start

Switch on the DVB-T TV by pressing the POWER button for more than 3 seconds.
The devices switch on and by first time using the automatic configuration should be
started.
1. A list of countries displays on the screen. Please choose the country which
you want and where the device is in use. Navigate by using the ▲/▼ but-
tons to the country und confirm the selecting by pressing the OK button.
2. The search starts automatically. The founded TV broadcast are displayed in
a list. After finishing the search run the device stored the founded TV broad-
cast into the channel list. The device changes directly to the live TV pro-
gram.
3. Please control OSD language. The default language is English. To change
the OSD language press the MENU button and choose the option System

Setting.

4. Press the OK button to display the system settings.
5. Choose the option OSD Language by using the ▲/▼ button. Choose the
language by using the ◄/► button. Confirm the selected language by the
OK button. The device goes back to the main menu.
6. Select again the option System Setting and press the OK button to display
them. Choose the option Time Zone and change the setting by using the ◄/
► button. Confirm the selected Time Zone by the OK button. The device
goes back to the main menu.
7. Select the option Display Setting and start them by pressing the OK button.
Control the setting Aspect Ratio, the best option should be the setting
AUTO. If not, you can change the option to AUTO and confirm them by
pressing the OK button. The device goes back to the main menu.
8. Press the RETURN button to switch into the live TV program.

Manuell Start

If by first time using the list of countries not appears on the screen, than the search of
TV broadcast need to be start manually.
Press the MENU button and choose by using the ▲/▼/◄/► buttons the option
Factory Setting. Press the OK button to open the factory settings. Press again the OK
button to reset the device and load the default settings.
After resetting the device the country list appears on the screen. Please follow the
instruction as descript at the above section Automatic start.
Notes:
Please pay attention that you have selected the correct country. The scan can be
successfully, when the search parameters are matches.
12

DVB-T

HTL 400T