Technical Design; Technical Data; Operation - SATA spray master RP Betriebsanleitung

SATA spray master RPOperating Instructions
US

6. Technical Design

6.1. Paint spray gun
Quick coupling connector
[1-1]
for SM pressurized cup with
check valve
Safety and ventilation valve
[1-2]
Air hose for pressurized cup
[1-3]
Material flow control with
[1-4]
counter nut
[1-5] Compressed air micrometer
[1-6] Locking screw
Infinitely adjustable round/
[1-7]
flat fan control

7. Technical Data

Description
Recommended spray gun inlet
pressure
Max. spray gun inlet pressure
Max. air pressure
Max. cup pressure
Pressure in cup variable
Recommended spraying distance
Air consumption
Max. material temperature
Weight (without material) of 750 ml
aluminum gravity flow cup

8. Operation

Warning!
Risk of injury from bursting compressed-air hose
If unsuitable compressed-air hoses are used, excessive pressure can
damage them and cause them to burst.
→ Use only solvent-resistant, anti-static and technically sound hoses for
compressed air with resistance to continuous pressure of at least 10 bar,
leakage resistance of < 1 MOhm and a min. inside diameter of 9 mm
(# 9902).
524
Pressure gauge for cup
[1-8]
interior pressure
[1-9] Air connection
[1-10] Control knob
[1-11] Safety valve for adjustment
unit
[1-12] Trigger
[1-13] Nozzle set
[1-14] Pressurized cup
[1-15] Screw-on lid
150 - 230 Nl/min at 1 - 2 bar
RP
15 psi - 29 psi
145 psi
44 psi
25 psi
from 0 to 1.7 bar
6.7" - 8.3"
122 °F
45.9 oz.