Philips Lumea BG9041 Bedienungsanleitung Seite 11

English
12
- Always check the device before you use it. Do not use the device
or adapter if it is damaged.
- The external flexible cable or cord of this transformer cannot be
replaced; if the cord is damaged, the transformer shall be
scrapped.
- Do not use the device if the UV filter of the light exit window
and/or attachment is broken.
- Do not use any pencil or pen to mark the areas to be treated. This
may cause burns on your skin.
- If you have a dark-colored skin, be careful with treating a darker
area immediately after a lighter area. The skin tone sensor may not
immediately block the treatment on the darker body area.
- Hair removal by intense pulsed light sources can cause increased
hair growth in some individuals. Based upon currently available
data, the highest risk groups for this response are females of
Mediterranean, Middle Eastern and South Asian heritage treated
on the face and neck.
- Adapter, light exit window and the filter of the attachment(s) can
become very hot after usage. Do not touch the adapter, inner part
of the light exit window and the filter or the inner part of the
attachment(s) without having these cool down.
- This device has a detachable power adapter. Only use the adapter
provided with this device. The reference number
(AD2069x20020HF) can be found on your device. The 'x' in this
number refers to the plug type for your country.
- For hygienic reasons, the device should only be used by one
person.
Note: If you notice a skin tone change from last treatment (e.g. due
to tanning), we recommend you to perform a skin test and to wait 30
minutes before your next treatment.