Service And Customer Care; Troubleshooting Guide - Kenwood CAP70 Bedienungsanleitungen

Service and
Customer Care
If you experience any
l
problems with the
operation of your appliance,
before requesting
assistance refer to the

'Troubleshooting Guide'

section in the manual or visit
www.kenwoodworld.com.
Please note that your
l
product is covered by a
warranty, which complies
with all legal provisions
concerning any existing
warranty and consumer
rights in the country where
the product was purchased.
Troubleshooting Guide
Problem
Appliance does
not operate.
Unable to open
can.
Can does not
rotate.
The knife
sharpener does
not work.
Bottle opener does
not work.
English
Solution
• No power - check the unit is plugged in.
• Check the lever is fitted correctly.
• Check that the cutter blade has pierced the
can and that the lever is fully pushed down.
• If there is a bump,dent, or thick seam in the
rim of the can then open from the other end
or reposition the blade.
• The unit is only suitable for round steel cans
with straight sides and rolled edges.
• If the lid of the can is recessed the drive
wheel cannot engage.
• Aluminium cans will not adhere to the
magnet.
• Serrated knives are not suitable.
• Knives without a serrated edge, preferably
carbon steel are most suitable for
sharpening.
• The sharpening action will need to be
repeated several times in order to sharpen
the knife sufficiently.
• Ensure the bottle is suitable.
• Only metal pop cap bottle are suitable for
the unit.
5
If your Kenwood product
l
malfunctions or you find
any defects, please send it
or bring it to an authorised
KENWOOD Service Centre.
To find up to date details
of your nearest authorised
KENWOOD Service centre
visit www.kenwoodworld.
com or the website specific
to your Country.
Made in China.
l