Transportation And Storage; Reciclying And Disposing - Greencut GTC300X Betriebsanleitung

PROBLEM
The straps do not
work forward
Excess heat
accumulates in
the transmission
/ tine area during
ploughing
NOTE: If you are unable to resolve the problem, contact the Authorised Service Centre.

TRANSPORTATION AND STORAGE

• Allow the equipment to cool completely before transporting or storing.
• Avoid a location exposed to sunlight when placing the machine in a vehicle. If the machine is left in a locked
vehicle for many hours, high temperatures inside the vehicle can cause the fuel to evaporate and cause a possible
explosion.
• To prevent fuel loss during transport, the product should be secured in its normal operating position and with
the fuel cap closed.
• Always store the product in a clean, safe, dry place with temperatures between 0º and 45ºC.
• The equipment is not weatherproof and should not be stored in direct sunlight, high temperatures or in damp
places.
• Never store the equipment in places where flammable materials, combustible gases or liquids, etc. are present.
• To reduce the risk of fire, keep the machine clean by removing traces of material, oil and grease.
• For long periods of storage, store the machine without fuel. The stored fuels must be stabilized with a stabilizer.
• Store the machine out of the reach of children.

RECICLYING AND DISPOSING

Worn products are potentially recyclable and should not be disposed of in the usual waste. Help us to protect the
environment and preserve natural resources.
Dispose of the device in an environmentally friendly manner. Do not dispose of it with household waste. Its plastic and
metal components can be separated and recycled. Take this appliance to an approved recycling centre (green dot).
Gasoline, used oils, oil/gasoline blends and objects stained with gasoline (e.g., rags) should not be disposed of in
regular trash, sewage, dirt, rivers, lakes or the sea. Oil-stained items should be disposed of in accordance with local
regulations: take them to a recycling center.
The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.
• Adjust the belt tension pulleys
• Turn off the engine and let it cool down
• Disconnect the spark plug wire
• Pull down the safety control levers
• Replace the spark plug strap and cable
• Remove vegetation as instructed
• FOLLOW ALL SAFETY INSTRUCTIONS
• Check transmission fluid and refill if necessary.
SOLUTION
81
EN