YATO YT-85915 Originalanleitung Seite 17

GB
Remove water from the inside of the washer before storage. This will prevent contamination of the washer by organic material
which may be present in the water, and damage to the washer if exposed to temperatures below 0 C. After using the washer and
O
disconnecting the water supply hose, also disconnect the high-pressure hose and then run the washer for 5 seconds. This will
remove as much water as possible from the inside of the washer pump. Do not run the washer for more than 5 seconds, as this
will damage the washer pump.
Store the washer in dry, dark places and ensure good ventilation. Do not store the washer at temperatures below 0 C. The place
O
of storage should protect the device from access by unauthorised persons, especially children.
Transport the washer over short distances by grasping the handle and using the wheels of the washer. It is advisable to disconnect
the lance and the high-pressure hose before transport over longer distances, and then cover the water inlet and outlet. The washer
can be transported vertically or horizontally. Ensure that the high-pressure hose is not damaged or deformed during transport.
O R I G I N A L I N S T R U C T I O N S
17