Werbung
Please read this manual before operating the unit
1.General Description
1.1 Check the package
Please check if damages have been caused during transportation. If any damage is
found, please notify the transportation firms and keep packing box for confirmation by
transportation firm.
2. Equipment Introduction
2.1
Brief Introduction
This product can be used in professional lighting sets with control circuit and
programmable memory circuit
2.2
Functions and Features
Sound control, built-in sound control rotating light sources, appearing 24 colourful
square light pillar.
3. Installation and Operation
3.1 Installation
When install this device be sure no inflammables and combustibles (ornament arties)
in at least the scope of 0.5 meter!
When choose the installation positions, ensure good ventilation and no stuff in fan and
ventilation tunnels.
3.2 Operation
Before operation please check the mains voltage. In case of large voltage fluctuations,
it is recommended to use 220V voltage-stabilized source or voltage regulators.
This product is the I class protective device: so, the Green/Yellow cable must be
connected to earth and must be done by professionals.
Remember do not touch the cover with hands when it is in operation.
The lighting effect is not designed for permanent operation, it is better to operation it in
intervals to avoid the overheating.
This device can only be used indoors, switch it on, colourful fan light pillar effect will
appear under sound operation.
------------------------------2------------------------------
Het apparaat is niet ontworpen voor continu gebruik. Het is raadzaam regelmatig
pauzes in te voegen om oververhitting te voorkomen.
Alleen voor binnengebruik.
3.3 Probleemoplossing
Indien de lamp niet oplicht, schakel de unit uit en controleer de werking van de voeding
en de zekering. Indien deze goed werken, controleer de lamp en vervang de defecte
lamp.
Indien de motor niet werkt, schakel de unit uit en controleer de zekering. Indien de
zekering goed is, is de motor defect. Laat de toestel van een kwalificeerde technicus
repareren.
4. Technische Specificaties
Buitenafmetingen: ..............................................................220×220×350mm
Nettogewicht:.........................................................................................2.5Kg
Spanning: .......................................................................... 220-240Vac/50Hz
Lamp: .......................................................39pcs 10mm high brightness LED
Lamp levensduur:.....................................................50.000 tot 100.000 uren
Functie :.....................................................................................RVB effecten
Watt: ........................................................................................................16W
------------------------------9 ------------------------------
Werbung
