Step 2: Monitor - ELRO PRO PV40 Anleitungshandbuch

7.
Place the camera on the mounting plate and attach the hex screw to the bottom of the bell
push. Now, the camera has been mounted to the mounting plate.

Step 2: Monitor

Connecting and mounting the monitor is the next step of the installation. The perfect mounting
height of a monitor is between 1.35 and 1.7 meters depending on the height of the users (1).
1. Take the mounting bracket for the monitor and mark the drill holes where the screws should
be inserted.
2. Drill two holes and mount the mounting bracket with the included materials.
3. Connect the bell push to the monitors:
a) Take the 50-cm connecting cable and link it to the outdoor unit's connection cable.
b)
Take the 15-metre connection cable and link it to the 50-cm connecting cable.
c) Connect the other end of the connection cable to the monitor.
d)
Link the cables with red, yellow, blue, and white wires to the included extension
cables.
e)
Plug the connectors of the extension cables into the monitor (top right, AD1)
4. Plug the adapter into the monitor (bottom left, GND) and into a power socket.
5.
Carefully slide the monitor over the hooks of the mounting bracket. Now, the video door
intercom is ready to use!
- 9 -