H
ow to use washer
I
Care before washing
Wash temperature
Normal machine wash
Permanent press
Hand wash
Sort laundry by...
Wash
Soiling
temperature
Colour
Fabric type
Before the first wash, select a cycle (Cotton 60°C, add a half load of detergent) allow the unit
to wash without clothing. This will remove residues and water from the drum that may have
been left during manufacturing.
1. Care Labels
Look for a care label on your clothes.
This will tell you about the fabric content of your
garment and how it should be washed.
Delicate
Do not wash
2. Sorting
To get the best results, sort clothes into loads that
can be washed with the same wash cycle.
Water temperature and spin speed and different
fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites.
Wash separately as dye and lint transfer can occur
causing discolouration of white etc. If possible, do not
wash heavily soiled items with lightly soiled one.
• Soil (Heavy, Normal, Light)
Separate clothes according to amount of soil.
• Color (White, Lights, Darks)
Separate white fabrics from colored fabrics.
• Lint (Lint producers, Collectors)
Wash lint producers and lint collectors separately.
3. Caring before loading
Combine large and small items in a load. Load large
items first. Large items should not be more than half
the total wash load. Do not wash single items.
This may cause an out-of-balance load. Add one or
two similar items.
• Check all pockets to make sure that they are empty.
Items such as nails, hair clip, matches, pens, coins
and keys can damage both your washer and your
clothes.
• Close zippers, hooks and strings to make sure that
these items don't snag on other clothes.
• Pre treat dirt and stains by brushing a little detergent
dissolved in water onto stains like collars and cuffs
to help lift dirt.
• Check inside of the drum and remove any item from
a previous wash.
15