Technical Specifications; Instructions For Use; Before Initial Operation; Inserting/Replacing The Battery - Fuxtec E522D Originalbetriebsanleitung

Redback_Hedge trimmer E522D_de-en-fr.book Seite 21 Freitag, 4. März 2016 9:18 09
E522D

Technical specifications

Appliance
Type
Nominal voltage
Battery type EP 20
EP 40
EP 60
No-load stroke rate
Blade length
Maximum branch thickness mm
Weight according to EPTA
Procedure 01/2003
(without battery)
Weight battery EP 20
EP 40
EP 60
A-weighted sound pressure level
according to ISO 22868, EN 3744:
Sound pressure level L
Sound power level L
wA
Uncertainty K
Total vibration value according to
ISO 22867:
Emission value a
h
Uncertainty K
Hedge trimmer
E522D
V 40
Ah 2,0
Ah 4,0
Ah 6,0
1300
-1
min
mm 560
22
kg 3,2
kg 0,9
kg 1,3
kg 1,7
dB(A) 88.4
pA
dB(A) 92
dB 3
2,5
m/s²
m/s² 1,5

Instructions for use

WARNING!
Switch the unit off and remove the battery
under the following conditions:
if the unit is left unattended;
–
before checking, cleaning or performing
–
other work on the unit;
if the unit starts vibrating excessively.
–

Before initial operation

Unpack the garden tool and accessories
and check that no parts are missing or
damaged.
NOTE
The batteries (optional; depending on
delivery scope) are not fully charged on
delivery. Prior to initial operation, charge
the batteries fully. See user manual of the
battery charger.

Inserting/replacing the battery

 Charging the battery as described in the
user manual of the charger.
 Press the charged battery into the power
tool until it clicks into place.
 To remove, press the release button (1.)
and pull out the battery (2.).
21