♦
tV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣
The
+,
➣
When "TV Speaker" is set to "Off", you can operate only "Sound Select" (in PIP mode) in Sound
menu.
Sound Select: Main/Sub
♦
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Selecting the Sound Mode
You can set the sound mode in the "tools" menu.
When you set to "Dual I-II", the current sound mode is displayed
on the screen.
1. Press the tOOLS button on the remote control.
. Press the ▲ or ▼ button to select "Dual I-II".
. Press the ◄ or ► button to select required option.
. Press the ENtER
Audio Type
Mono
A2
Stereo
Stereo
Dual
Mono
NICAM
Stereo
Stereo
Dual
➣
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
➣
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
➣
This function is only available in TV mode.
Connecting headphones (Sold separately)
You can connect a set of headphones to your set if you wish to
watch a tV programme without disturbing the other people in the
room.
➣
When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" and "Sound Select"(in PIP mode) in
Sound menu.
➣
Prolonged use of headphones at a high volume may damage your
hearing.
➣
You will not receive sound from the speakers when you connect headphones to the system.
➣
The headphone volume and TV volume are adjusted differently.
- and MUtE buttons do not operate when the "TV Speaker" is set to Off.
button.
Dual 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
English -
Anynet+ (hDMI-CEC)
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
tools
:
Standard
:
Custom
:
Off
:
Off
:
Off
◄
Mono
Move
Adjust
TV Side Panel
►
Exit