Prior To Use; The Correct Installation Location - LIVARNO LUX LLES B2 Bedienungsanleitung Und Serviceinformationen

LIVARNO LUX LLES B2

Prior to use

Remove the energy-saving outdoor spotlight and the installation materials from the packaging.
Check the energy-saving outdoor spotlight for signs of damage. If damaged, the energy-saving outdoor
spotlight must not be used.
Only use energy-saving spiral light bulbs with E27 base and a maximum power of 23 watts!
Please note:
The supplied energy-saving light bulb is not dimmable. Do not use the energy-saving outdoor
spotlight with the supplied light bulb in circuits with dimmers.
The energy-saving light bulb (10) is stored within
the spotlight so that it can be transported safely.
Loosen the 2 screws (1) with a Phillips screwdriver
and carefully tilt the front pane (9) upwards.
Remove the packaging with the energy-saving
light bulb (10). Open the packaging, remove the
energy-saving light bulb (10) and screw it into the
socket in a clockwise direction. When doing so,
handle the energy-saving light bulb (10) by its
base and not by its glass body. The bulb should
only ever be handled with a cloth. Close the front
pane (9) downwards now and tighten the 2
screws (1) again.

The correct installation location

Select the installation location carefully and prepare well for the installation.
 Place all individual parts, required tools and installation material so they are well arranged and ready
to hand.
 The energy-saving outdoor spotlight may be mounted only on stable substrates, for example,
brickwork.
 Do not install the energy-saving outdoor spotlight above a heat source or in the immediate vicinity of
other light sources. When selecting the installation location, also pay attention to the illustration [D] on
the inside cover.
8 - English