Herunterladen Inhalt Inhalt Diese Seite drucken

Warning Information; Explanation Of The Symbols Used - Cartrend 10699 Originalbetriebsanleitung

Akku-poliermaschine
Vorschau ausblenden Andere Handbücher für 10699:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
ai158262451737_108316_Cartrend_10699_Akku-Poliermaschine_BAL_110220.pdf
12
25.02.20
10:55

WARNING INFORMATION:

· Do not use this device in the vicinity of flammable liquids or gases.
· To avoid damage, only operate the device and its accessories under supervision.
· Only use the supplied accessories.
· This device is not a toy and should therefore be kept out of the reach of children.
Note:
· Only use the supplied charger.
· When you are disconnecting the charger from the socket, pull on the plug and not on the cable.
· If the charger is defective, do not use it to recharge the battery, but replace it immediately with an
original charger.
· Defective batteries must not be thrown away in the waste, but handed in to collection points.
Electrical safety:
· Always check that the mains voltage matches the voltage specified on the rating plate of the power
tool.
· Remove the battery from the machine before making any adjustments, changing the polishing pad or
putting the machine away again.
Service:
· Maintenance work on the machine may only be carried out in a specialist workshop, otherwise there is
a risk of injury.
Safety information about the battery and the charger:
1. Only charge the 12V battery with the supplied charger, otherwise the battery may become damaged
and lead to a risk of injury and fire.
2. Do not charge the battery if the temperature is lower than 4 ° C or higher than 40 ° C.
3. Do not short-circuit the battery, since it will overheat and lead to a risk of fire.
4. Do not expose the battery to water or rain.
5. Do not throw the battery into the fire, since it could explode.
6. The supplied charger may only be used in combination with the enclosed battery.
7. Disconnect the plug of the charger from the mains socket before carrying out maintenance
or cleaning work.
8. Ambient temperature range for the use of the power tool and the battery: -10 - 55° C
9. Ambient temperature range for the storage of the power tool and the batteries: -5 - 35 ° C
10. Ambient temperature range for the charging system when charging: 4°C - 40°C

EXPLANATION OF THE SYMBOLS USED

Protection class II (double insulation) – (charger)
Read the manual before use.
Battery recycling
The batteries must be removed from the device before disposal.
Separate disposal of used products and packaging makes it possible to recycle and reuse materials.
Li-ion
The reuse of recycled materials helps to avoid environmental pollution and reduces the need for raw
materials.
Only suitable for use indoors.
!
Warning!
12

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis