Noise/Vibration Information; Declaration Of Conformity; Maintenance And Cleaning - Bort BSS-1008 Handbuch

• When vacuuming stairs, the appliance must always be
lower down than you.
• In the following cases, stop using the appliance
immediately and contact the after-sales service:
– if the mains connection cable is damaged.
– if you have accidentally vacuumed up some liquid or
liquid has entered the inside of the appliance
– if the appliance has been dropped.
• Do not use the power cord to carry the vacuum cleaner.
• Fully extend the power cord when using the vacuum
cleaner continuously for several hours.
• When disconnecting the appliance from the mains, pull
on the plug, not the power cord.
• Do not pull the power cord around sharp corners or
allow it to become trapped.
• Unplug the power cord from the mains before carrying
out any work on the vacuum cleaner or its accessories.
• Do not use the vacuum cleaner if it is damaged. Unplug
the power cord from the mains if a fault is detected.
• For safety reasons, only authorised after-sales service
personnel are permitted to carry out repairs and fi t
replacement parts to the vacuum cleaner.
• Protect the vacuum cleaner from outside weather
conditions, moisture and sources of heat.
• The vacuum cleaner is not suitable for use on building
sites.
=> Vacuuming up building rubble could damage the
appliance.
• Switch off the appliance when it is not in use.
• At the end of its life, the appliance should be rendered
unusable, then disposed of in an appropriate manner.
• Plastic bags and fi lms must be kept out of the reach of
children before disposal (risk of suff ocation).
• Do not pour any fl ammable substances or substances
containing alcohol onto the fi lters (fi lter bag, motor
protective fi lter, exhaust fi lter, etc.).
Service
Have your power tool serviced by a qualifi ed repair person
using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.

MAINTENANCE AND CLEANING

Make sure that the machine is not live when carry-
ing out maintenance work on the motor.
• Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt.If the dirt does not come off use a soft
cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These sol-
vents may damage the plastic parts.
• The machine requires no additional lubrication.
• Should a fault occur, e.g. after wear of a part, please
contact your local BORT GLOBAL LIMITED dealer.
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resources and
protecting the environment by returning this appliance to
the collection centres (if available).
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these ma-
terials to the appropriate recycling locations. Take your
unwanted machines to your local BORT GLOBAL LIMITED
dealer. Here they will be disposed of in an environmentally
safe way.

Noise/Vibration Information

Measured in accordance with EN 60745-2-11 the sound
pressure level of this tool is 70 dB(A) and the sound power
level is 78 dB(A) (standard deviation: 3 dB), and the vibra-
tion is 3,7 m/s 2 (hand-arm method).

Declaration of Conformity

We declare under our sole responsibility that this product
is in conformity with the following standards or standard-
ized documents: EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3, EN 62301, in accordance with the regula-
tions 2006/95/EC, 2004/108/EC, 2009/125/EC.
8