Inhaltsverzeichnis
Werbung
Contents
1.
Notes on documentation
1.1
Declarations of conformity
and approvals
1.2
Storing the documents
1.3
Symbols used
1.4
Other applicable documents
1.5
Normative references
1.6
Country-specifi c references
2.
Safety instructions
2.1
Intended use
2.2
User groups to
IEC 62 368
2.3
Safety instructions
– Explanation of
safety symbols
3.
Device description
3.1
Function description
and components
3.2
Labelling
3.3
Scope of delivery
4.
Assembly and siting
4.1
Site requirements
4.2
Required tools
4.3
Assembly procedure
4.3.1
Releasing the packing bands
and unpacking
4.3.2
Reading the instructions
4.3.3
Removing the
enclosure panels
– Dismantling the
aluminium front doors
– Dismantling the rear doors
– Dismantling the rear panel
– Dismantling the side panels
Schranksystem VX IT / VX IT enclosure system / Baies VX IT
Page
6
4.3.4
Removing any accessories
supplied loose
6
4.3.5
Lifting the rack off of the pallet
6
4.3.6
Removing the cardboard
from the bottom
6
– Optional installation of
6
the base/plinth
6
– Installing castors or
6
levelling feet
7 – 37
4.3.7
Moving the rack to
7 – 29
the installation site
4.3.8
Preparing for installation
7 – 29
– Depth adjustment of the
7 – 29
482.6 mm (19˝) level
– Width adjustment of the
30 – 37
482.6 mm (19˝) level
38 – 42
– Moving the swing frame
– Swing frame –
38
Swapping the hinges
39
4.3.9
Baying the rack (optional)
40 – 42
4.3.10 Securing the rack to the fl oor
43 – 67
4.3.11 Installing/modifying
43
gland plates (optional)
43
5.
Transport
44 – 67
6.
Installation
6.1
Installing the
44
customer hardware
44
6.2
Installing the power and
network cables
45 – 48
– Cable entry in the roof
– Dismantling/assembling of
45
the roof plate (optional)
46
– Venting the roof plate (optional)
47
– Cable entry in the base
48
– Cable management
accessories
6.3
Connection points,
protective earthing, electrical
safety, accessory kits for
protective earthing
Page
6.4
Re-installing the removed
49
enclosure panels
49
– Fitting the rear doors
– Fitting the rear panel
50
– Fitting the side panels
– Fitting the aluminium front door –
50
r/h door hinge
– Fitting the aluminium front door –
51
l/h door hinge (swapping hinge
to opposite side)
52
– Fitting the sheet steel door –
53 – 64
l/h door hinge (swapping hinge
to opposite side)
54 – 59
6.5
Other accessories
7.
Commissioning
60 – 62
8.
Operation
63
9.
Troubleshooting
10.
Inspection and maintenance
64
11.
Storage and disposal
65
12.
Technical
66
specifi cations
– 482.6 mm (19˝) mounting
67
angles, standard
68
– 482.6 mm (19˝) mounting
69 – 91
angles, dynamic
– Empty enclosure
69 – 77
13.
Spare parts
14.
Warranty
78 – 82
15.
Customer services addresses 103
78
79
80
81
82
83 – 84
Page
85 – 91
85
86
86
87
88 – 89
90
91
92
92 – 93
93
94
94
95 – 102
95 – 97
98 – 100
101
103
103
3
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
