Adjusting The Vox Sensitivity; Selecting A Lullaby - switel BCF810 Bedienungsanleitung

1
Adjusting the VOX sensitivity
The VOX
automatically from the transmitter to the receiver immediately a voice or sound
is detected.
Press the button five times.
This icon appears in the display for a few seconds.
Use this button to set VOX to OFF or adjust the sensitivity to one of 5 levels.
When one of the five levels has been set, the VOX LED lights up red and the
display goes out after 10 seconds.
The display is reactivated when a sound is detected or a button on the receiver
is pressed.
1
VOX: Voice Operated Transmission = Sound detection

Selecting a lullaby

Press the button on the right hand side of the receiver.
This icon appears in the display.
Use the button to select one of the 5 lullabies (1-5).
If no number is displayed, all of the lullabies will continue to play in sucession
until deactivated.
Use this button to adjust the volume to one of five settings. The volume levels
will be adjusted on both the transmitter and receiver simultaneously.
This icon appears during the volume adjustment.
1
function (sound detection) causes the system to start transmitting
Operating the Receiver
61