OPERATION
Oven
EN 16
The microwave starts pre-heating; the display shows the text
'PRE-HEAT' and the oven indicator flashes.
4. When pre-heating is ready, a beep sounds and the display
shows the oven temperature.
5. Open the door and place the dish in the microwave.
The display shows the temperature alternately with 'SET TIME'.
6. Turn the 'time' dial to set the time.
▷ You can set a time up to 60 minutes.
▷ Turn the 'time' knob anticlockwise to go to 60 minutes
straight away, or turn clockwise to start from 0 seconds.
The display shows the set time, and a moment later the
selected temperature alternately with the text 'PRESS START'.
7. Press the start button.
The microwave starts with the chosen settings; the microwave
light comes on, the turntable starts rotating and the time in the
display counts down.
• You can increase or decrease the set time during cooking in
1-minute steps. To do that, press the 'more' or 'less' button.
• During pre-heating, you can check the set temperature by
pressing the function button. The set temperature appears in
the display for three seconds.
You can cook dishes with the oven function the same way as in
a conventional oven, without using the microwaves. The top and
bottom heating element are both turned on.
1. Turn the function knob to the 'oven' function.
The display shows the oven indicator and the top/bottom
element indicator alternately with '100C' and 'PRESS START TO
PRE-HEAT OR SET TIME'.
2. Press (a number of times) on the function button to set the
temperature (from 100 °C to 250 °C).
3. Turn the 'time' dial to set the time.
▷ You can set a time up to 60 minutes.
▷ Turn the 'time' knob anticlockwise to go to 60 minutes
straight away, or turn clockwise to start from 0 seconds.