Technical Data - Weller Laser Line serie Originalbetriebsanleitung

Technical Data

Extraction unit Laser Line
Mains supply voltage
Power consumption
Dimensions L x W x H
Weight
Maximum quantity supplied
Maximum vacuum
Noise emission level 0 1 m
HEPA Class Micro Filter, separation
degree,PPS
Active Carbon Gasfi lter Chemisorption,
separation degree
Pre fi lter (class / surface)
RS232 port
USB port
Laser Interface
Warranty
Claims by the buyer for physical defects are time-barred after a period of one year from delivery to the
buyer. This does not apply to claims by the buyer for indemnifi cation in accordance with §§ 478, 479
BGB (German Federal Law Gazette).
We shall only be liable for claims arising from a warranty furnished by us if the quality or durability warranty
has been furnished by use in writing and using the term „Warranty".
The warranty shall be void if damage is due to improper use and if the device has been tampered with by
unauthorised persons.
Subject to technical alterations and amendments.
For more information please visit www.weller-tools.com
18
Laser Line 200V
(V / Hz) FT91001699:
230 / 50
FT91001299:
120 / 60
(W) 170
(mm) 320 x 320 x 700
(inch) 12,60 x 12,60 x 27,60
(kg) 21
(lb) 55,1
(m³/h) 230
(Pa) 2700
(dB(A)) < 52
(%) > 99.95
(%) > 99.96
(m²) F7 (0,5)
optional: F7 (2,5)
All system functions can be operated and remo-
tely monitored via the RS232 port.
The USB port can be used to load fi rmware
updates, run effi ciency tests and log data.
Do not leave the USB medium inserted for longer
than 2 minutes. After this time expires, the USB
module will switch off automatically.
-
Laser Line 400V
FT91002699:
230 / 50
FT91002299:
120 / 60
315
441 x 441 x 1020
17,40 x 17,40 x 40,20
51
112,4
645
3000
< 53
> 99.95
> 99.96
F7 (2,0)
optional: F7 (10)
optional