Changing the radio channel display
on the temperature station
If the temperature station is receiving the out-
door sensor radio signal, it will automatically
display the corresponding channel.
However, you can also manually set the dis-
play of various radio channels.
♦
Press the
switch between the displays CH (display
channel 1), CH (display channel 2), CH
(display channel 3) and
channels alternately in a loop).
NOTE
►
Only the values from outdoor sensors
which are connected to the temperature
station will be displayed.
►
If you are using several outdoor sensors
you should select a different radio chan-
nel for each outdoor sensor.
AFT 77 A1
button
repeatedly to
(display all
GB │ IE
│
59
■