Troubleshooting - auna AMP-9200 BT Handbuch

TROUBLESHOOTING

Problem
No sound
Feedback
Possible Reason
Sound source or speakers
may not be connected
properly.
Master volume control
may be set to a minimum.
The speaker's wire might
be the wrong impedance.
The amplifier is shutting
down or powering off
Microphone and speakers
are
to close together
Solution
Check all connections.
Adjust the volume control
to a higher setting.
Make sure that the
speakers that you have
connected to the amp are
matching in impedance.
Turn the amplifier off and
let it cool, make sure that
the amplifier is properly
ventilated, and then turn
it back on..
Reposition the
microphone and speakers
EN
17