Power Supply - Canon imageRUNNER serie Anwenderhandbuch

CAUTION
Do not install the machine in unstable locations, such as unsteady platforms or
inclined floors, or in locations subject to excessive vibrations, as this may cause the
machine to fall or tip over, resulting in personal injury.

Power Supply

WARNING
•
Do not damage or modify the power cord. Also, do not place heavy objects on the
power cord, or pull on or excessively bend it, as this could cause electrical damage
and result in a fire or electrical shock.
•
Keep the power cord away from a heat source; failure to do this may cause the power
cord coating to melt, resulting in a fire or electrical shock.
•
Do not connect or disconnect the power cord with wet hands, as this may result in
electrical shock.
•
Do not connect the power cord to a multiplug power strip, as this may cause a fire or
electrical shock.
•
Do not bundle up or tie the power cord in a knot, as this may result in a fire or
electrical shock.
•
Insert the power plug completely into the power outlet, as failure to do so may result
in a fire or electrical shock.
•
Do not use power cords other than the power cord provided, as this may result in a
fire or electrical shock.
•
As a general rule, do not use extension cords. Using an extension cord may result in
a fire or electrical shock. If an extension cord must be used, however, use one rated
for voltages of 220 - 240 V AC and over, untie the cord binding, and insert the power
plug completely into the extension cord outlet to ensure a firm connection between
the power cord and the extension cord.
•
Do not use power supplies with voltages other than those specified herein, as this
may result in a fire or electrical shock.
•
Always grasp the power plug when disconnecting the power cord. Pulling on the
power cord may expose or snap the core wire, or otherwise damage the power cord. If
the power cord is damaged, this could cause current to leak, resulting in a fire or
electrical shock.
xxii