Fault Messages And Troubleshooting; Fault Messages - Teuco VASCHE Betriebsanleitung

EN
3. hYDROTOP hYDROSILEnCE
Use the purpose-provided spanner (2) to
disassemble the cover grille.
Only clean with water.
The ball (4) can be disassembled further by
unscrewing the nozzle and pressing the lock tab in
the point indicated by the arrow.
To get the best operation from the whirlpool jet, refit
the ring nut (3) without screwing it on too tight.
7. FAULT MESSAGES AnD
TROUBLEShOOTInG
The device is fitted with several safety systems
which control the proper operation of the system.
In the event of a fault, the system intervenes by
deactivating the function under way. The display
shows the type of error detected.
Some of these faults can be remedied without
calling for a technician; the table specifies what to
do to restore the blocked or faulty function.

FAULT MESSAGES

Insufficient Water Level
Shown if the minimum water level in the tub is not
reached.
Top up the water level in the tub.
n.B.: Some functions are disabled if there is
no water.
Insufficient Sanitiser Level
Minimum sanitiser level in the tank not reached.
Add sanitiser using the dedicated top-up (see
section entitled SANITISING FUNCTION).
36
4
3
2
1
Insufficient water level screenshot
Insufficient sanitiser level screenshot
5