Additional Information
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Problem
No picture (screen is dark), no sound.
Poor or no picture (screen is dark), but
good sound.
Good picture, no sound.
No colour on colour programmes.
Distorted picture when changing
programmes or selecting Teletext.
Remote control does not function.
The standby indicator
flashes.
Interference on picture from external
equipment.
•
If you continue to have these problems, have your TV serviced by qualified personnel.
•
NEVER open the casing yourself.
Suggested remedy
•
Plug the TV in.
•
Press the
•
If the
button on the remote control.
•
Check the aerial connection.
•
Turn the TV off for 3 or 4 seconds and then turn it on again
using the
•
Using the MENU system, select the Picture Adjustment
display. Adjust the brightness, picture and colour balance
levels.
•
From the Picture Adjustment display select RESET to return
to the factory settings.
•
Press the
•
If
is displayed on the screen, press the
remote control.
•
Using the MENU system, select the Picture Adjustment
display and adjust the colour setting.
•
From the Picture Adjustment display select RESET to return
to the factory settings.
•
Turn off any equipment connected to the scart connectors on
the rear of the TV.
•
Replace the batteries.
•
Contact your nearest Sony service centre.
on the TV
•
Reduce sharpness level.
button on the front of the TV.
indicator is on press the
button on the front of the TV.
button on the remote control.
/
button or a numbered
button on the
25