Specifications - Shindaiwa PT262S Bedienungsanleitung

MODEL
Length (standard)
Length (extended)
Width
Height
Weight (dry)
Engine Type
Bore
Stroke
Displacement
Exhaust System
Carburettor
Ignition System
Spark Plug
Fuel
Fuel/Oil Ratio
Gasoline
Fuel Tank Capacity
Recoil Starter System
Clutch
Sprocket Type
Drive Shaft
Gear Case Ratio
Oiling System
Chain Oil Capacity
Handles
Shoulder Harness
Idle Speed
Clutch Engagement Speed
Wide Open Throttle Speed
Guide Bar and Saw Chain (91VXL)

Specifications

PT262S
2716 mm
3675 mm
273 mm
260 mm
7.9 kg
Air cooled, two-stroke, single cylinder gasoline engine
34 mm
28 mm
3
25.4 mL (cm )
Spark arrestor muffler or spark arrestor muffler with catalyst
Diaphragm w /purge pump
Flywheel magneto, capacitor discharge ignition type
NGK CMR 7H Gap 0.65 mm
Mixed (Gasoline and Two-stroke Oil)
50: 1 (2%) for ISO-L-EGD Standard (ISO/CD 13738), JASO FC/FD grade and
shindaiwa Premium 50: 1 oil.
Regular grade petrol. Minimum 89 Octane unleaded petrol is recommended.
Do not use fuel containing methyl alcohol or more than 10% of ethyl alcohol.
0.6 L
Automatic Rewind Starter
Centrifugal Type
6 tooth spur, 9.53 mm (3/8 inch) pitch
Aluminum Extrusion
1.5 : 1
Automatic
0.20 L
Right hand grip w/throttle trigger and throttle trigger lockout
Standard
3000 r/min
4310 r/min
11200 r/min
305 mm (12 in.); 9.53 mm (3/8 inch) pitch chain, 0.050 gauge
25
Specifications