Pelgrim IDK832 Anleitung Seite 96

use
GB 12
Attention
Be careful with enamelled sheet-steel pans:
• t he enamel may chip (the enamel comes loose from the steel), if
you switch the hob on at a high setting when the pan is (too) dry;
• t he base of the pan may warp - due, for example, to overheating or
to the use of too high a power level.
Attention
Never use pans with a misshapen base. A hollow or rounded base can
interfere with the operation of the overheating protection, so that the
appliance becomes too hot. This may lead to the glass top cracking
and the pan base melting. Damage arising from the use of unsuitable
pans or from boiling dry is excluded from the guarantee.
Minimum pan diameter
T he diameter of the bottom of the pan must be at least 12 cm. You will
achieve the best results by using a pan with the same diameter as the
zone. If a pan is too small the zone will not work.
Pressure cookers
I nduction cooking is very suitable for cooking in pressure cookers. The
cooking zone reacts very quickly, and so the pressure cooker is quickly
up to pressure. As soon as you switch a cooking zone off, the cooking
process stops immediately.